Wicked EDF Motor 4000KV

Product Information

DonsRC new EDF motor with a lower KV. The lower KV is great for use in twin setups to keep the amp draw down.

Test Data:

3S lipo with SF fan (3 blades): 37,500 rpm, 23 amps,  250 watts, 19-20 oz thrust   Great for Hobby Lobby  Executive Jet!
3S lipo with XF fan: 42,500, 17 amps, 190 watts
3S lipo with 64mm 5 blade EDO fan; 38,500rpm, 330 watts, 30 amps
3S lipo with Hyperflow fan: 41,000 rpm, 275 watts, 24 amps
4Slipo with Haoye 7 blade 51mm fan: 47,000 rpm, 455 watts, 33 amps Great for Electrifly L-39)
4S lipo with Hyperflow fan, 47,000 rpm, 35 amps, 480 watts
4S lipo with Eflite/SF fan (3 blades)49,500rpm, 34 amps, 450 watts Great for Efite F-15, or Gaui TigerShark, or Gaui Tigershark Delta. Standoff adapter required.
4S lipo EDO 64mm fan (5 blade): 47,000 rpm, 39 amps,550 watts Great upgrade for Hobby Lobby EDF ARFs airplanes
4S lipo Alfa 5 blade fan:  49,000,  34 amps, 470 watts Great for Alfa EDF models and 4S flying.

Try the Wicked Extreme for nearly the same performance but on 3S lipo!

The use of the Wicked EDF motor in other EDF fan units or with higher cell count lipos than listed above may burn out your motor, ESC and puff your lipo. Please email DonsRC with any questions on setups not listed.

KV: 4000-4200 rpm/volt



Installs easily into SF housing.  2.3mm shaft means the stock rotors and collets
mount right on for Eflite F-15 and Executive Jet.!




Please note the motor options when ordering below:

Motor only with 2.3mm shaft:  For drop in mounting into the SF fan. Excellent motor for the Hobby Lobby Executive Jet and Soarstar EDF. Do not exceed 370 watts with no standoff adapter.

Motor only with 3mm shaft:  For use in the new GWS EDF 75 with 4 blade rotor like in the GWS A-4, do not exceed 370 watts with no standoff adapter.

Motor with standoff adapter and EDO rotor plug:  For use in the 64mm EDO 5 blade fans units as in the Hobby Lobby F-18, Mirage, and  Raidentech F-15 jets. The 5 blade rotor in these planes presses directly onto the included rotor adapter!

Motor with standoff adapter and Alfa rotor plug:  For use with  the Alfa line of EDF jet models. Strong 4S performance.  

Motor with standoff adapter and no rotor plug : 3mm shaft output, as used in my Electrifly L-39 video. Fits Hyperfow , XF, Haoye, Wemotec Micro, and Airfield 64mm  fans.

WARNING: Do not use any Wicked EDF motors with Electrifly or Suppo brushless ESCs, they can not handle the the high rpm of a 6 pole outrunner and will fry the ESC and motor. The Hobbywing Pentium brand of ESCs are the only recommended ESC for all Wicked EDF motors. If using any other brand please contact the ESC manufacturer to get the rpm limitation of the ESC with a 6 pole outrunner motor.  If you are unsure of the ESC you have then please email DonsRC before you try as DonsRC can not be held responsible for burned out motors which are damaged due to lower quality brushless ESCs.

Price: $60.00 $35.00

• Tell a Friend